Marine Firefighter Costume

Firefighters wear different clothes in peacetime and combat (fireman costume). Protect the human body from flame heat radiation and steam burns and scalds, and waterproof clothing. Clothes with gloves and boots made of the aluminum-plated fireproof fiber cloth, equipped with eye protection and a non-combustible hard helmet that is anti-collision and anti-shock.

It is used to isolate the human body from the outside world and achieve the purpose of comprehensive protection. With the protection of protective clothing, the crew can enter the fire zone through the flames to detect the source of the fire, close the fuel valve, rescue the trapped persons or put out the fire. Firefighter suit and accessories should be stored in a dry and warm cabin, and checked and dried frequently. When it gets wet during work, it can only be dried without twisting.

At the same time, there will be various accessories, such as a fire waist ax, air respirator, fire-resistant rope, etc. There is a set of firefighter equipment.

Protective clothing is made of composite material of fiber fabric and aluminized film. The garment includes jacket, trousers, gloves, headcover and foot cover. It does not contain asbestos and has the advantages of double lightness, high strength, flame retardant, high-temperature resistance, heat radiation resistance, wear resistance, folding resistance and non-toxic to the human body.

Fireman’s outfit can effectively protect firefighters and high-temperature operation personnel from flame and high-temperature burns. Can effectively ensure the fire brigade equipment quality supervision and inspection center testing qualified, in line with GA88 “Fire insulation suit performance Requirements and Test Methods” and “International Fire Safety System rules” requirements.

Our Fireman Outfit Set Contains:

  • 1Fireman’s outfit box(G.R. P, segregation compartment type) 
  • 1 protective clothing 
  • 1 pair of fireman boots 
  • 1 pair of fire resistant gloves 
  • 1 safety lamp 
  • 1 fire axe with insulated handle 
  • 1 rigid helmet c/w visor & neck curtain 
  • 1 6L self-contained breathing apparatus (30min) 
  • 2 Spare Gas Cylinder for SCBA 
  • 1 two-way portable wireless phone 
  • 1 life line 30m c/w snap-hook and belt
Marine and Ship Fireman Outfit Set

Protective clothing for firefighting DXPC-1

Standard: SOLAS 1974, MSC.36(63), MSC.97(73),MSC.98(73), EN 469 (2005) including A1(2006)and AC (2006). 

Overall performance & requirement: 

  • Water proof: Hydraulic pressure 24000 Pa 
  • Heat radiation resistance: Under the heat radiation with 10kw/m”, the increase of tempeature on inner-surface not over 25℃, after irradiated for 30 seconds. 
  • Material: Aramid fiber 
  • Protection class: limit the fire spreading (outer material): pass 
  • Limit the fire spreading (inner material): pass 
  • Thermal conductivity (radiant heat): I pass 
  • Thermal conductivity (thermal convection):I pass 
  • Thermal contact: I class

Fireman’s outfit box

  • Material: Fiberglass 
  • Thickness: 4mm 
  • Accessories: 304stainless steel hinges and hardware 
  • Size: 810mm (L) *650mm (W) *500mm (H) 
  • At the top of the box, spraying white “Fireman’s outfit” 
  • Certification: Manufacturer certification
Marine Fireman's outfit box

Personal protection Safety lamp

  • Rated Voltage: 2.4V 
  • Degree of IP: IP67 
  • Class of Explosion-proof: Exd II CT6 Gb Use a battery-powered standard (2 x1. 5 v), incandescent bulbs. 
  • Working time: 15h

Personal protection Safety lamp

Life Line c/w Belt 30m Snap-hook

  • Length: 30m
  • Diameter: 5 mm
  • Breaking load: 3.5 kN
  • Material: Φ5mm steel wire rope with rubber cover and two hook

Marine Life Line c/w Belt 30m Snap-hook

Safety Belt GA494-2004

  • Weight: 0.5kg 
  • Bearing weight: 887.8 kg 
  • Length: 115.5 cm 
  • Width: 7.5 cm 
  • Features: wear resistance, flame retardancy, working pull 4500N Material: nylon ribbon and metal components.
Marine Safety Belt

Fireman Axe

  • Length: 280mm 
  • Width: 160mm 
  • Weight: 0.8kg 
  • High voltage resistance: 20000v 
  • Material: High quality carbon steel calcined, rubber with insulated handle

Marine Fireman Axe

Chemical Protection Equipment

Chemical Protection Equipment Set Contains:

  • 1 personal protection box(G.R. P, segregation compartment type) 
  • 2 Chemical protective clothing 
  • 1 6L self-contained breathing apparatus (30min) 
  • 2 Spare Gas Cylinder for SCBA 
  • Certification: MED

Personal protection Safety lamp

  • Rated Voltage: 2.4V 
  • Degree of IP: IP67 
  • Class of Explosion-proof: Exd II CT6 Gb Use a battery-powered standard (2 x1. 5 v), incandescent bulbs. 
  • Working time: 15h

Life Line c/w Belt 30m Snap-hook

  • Length: 30m
  • Diameter: 5 mm
  • Breaking load: 3.5 kN
  • Material: Φ5mm steel wire rope with rubber cover and two hook

 

Marine Chemical Protection Equipment

Chemical Protection Equipment box

At the top of the box,spraying white “Chemical Protection Equipment” Certification: Manufacturer certification. Other parameters are the same as Fireman’s outfit box.

Self-contained Compressed Breathing Apparatus (SCBA)

Marine Self-contained Compressed Breathing Apparatus (SCBA)

Spare Gas Cylinder for SCBA

  • Capacity: 6 L
  • Material: Steel
  • Working Pressure: 0-30Мра

Flame Proof Suit Features

  • Short-distance fire protection clothing, also known as fire protection clothing and aluminized fire protection clothing, is used to extinguish the fire in case of extremely high temperature and need to prevent complete swallowing of flame.
  • Firefighter helmet, half shell fire helmet, flame retardant, and heat resistance. Part of a fireman’s uniform.
  • Fire boots, made of flame retardant rubber, lined with sterile canvas and sponge soles. Anti-slip, anti electric shock, anti-puncture, fire prevention, waterproof, anti-oil, anti smashing, anti-puncture, steel bottom, and steelhead, which have a good protective effect on bare feet and feet.
  • Fireman’s safety belt must be used with a safety hook and safety rope.
  • The safety belt is fastened to the fireman’s waist with two half rings. If the safety hook is connected to each of the two halves, the safety belt can be used to balance the fireman when the fireman is raised or lowered. The fire safety belt is reliable equipment for the safety protection of firefighters climbing, and can also be used as the safety belt of other departments.
  • Portable explosion-proof lamp, yellow hand lamp with bulb and battery.
  • Fireman’s lifeline and fireman’s safety rope can be connected to the safety belt of the fireman’s respiratory or separate safety belt through a spring hook to prevent respirator separation during lifeline operation.
  • The short-handled fire ax is made of plastic and steel.
  • Fireman equipment box and glass fiber fire equipment box are made of high-quality resin and glass fiber felt. They are special storage boxes for fire equipment, with corrosion resistance, good weather resistance, no rust, and mildew.

Instant Quote Online

Dear friend, you can submit your pressing need online, our staff will promptly get in touch with you. If you have any questions, consult our customer service through online chat or telephone in a timely fashion. Thank you for your request online.

[86] 0411-8683 8503

available from 00:00 – 23:59

Address :Room A306, Building#12, Qijiang Road, Ganjingzi